Kingspan Kooltherm K118 72.5mm Insulated Plasterboard (2400 x 1200mm) – 2.88m2

72.5mm Kingspan K118

72.5mm Kingspan K118 is an insulation material manufactured with a phenolic core. The K118 insulated Plasterboard has a thermoset fibre-free rigid phenolic core. The K118 board has a low emissivity composite foil facing. These boards are bonded to tapered edge plasterboard. The plasterboard is 12.5mm and gypsum based. The K118 range is available in these additional sizes- K118 32.5mm, K118 37.5mm, K118 42.5mm, K118 52.5mm, K118 57.5mm K118 62.5mm, K118 82.5mm, and K118 92.5mm.

Phenolic insulation – the most thermally efficient insulation commonly used. Phenolic insulation boards have a manufacturing process where a rigid thermoset foam forms an insulating core between two facing elements. As a result, choosing phenolic insulation will make it easier to reach low target U-values with a minimal thickness of insulation.
Thermal – K118 has a thermal conductivity of just 0.019W/mK. Thermal conductivity means less heat will pass through the insulation boards. As a result, this will keep the internal temperature level. The thermal properties of the K118 72.5mm will also prevent heat and energy from escaping the building and because of this the building will be a much more comfortable space.
Sustainability – The K118 insulated plasterboard will help by reducing the heat escaping the building and most importantly, reducing the contribution to global warming. in conclusion, this will have positive effects on climate change. Moreover, the lack of heat loss can save money on energy bills by up to 30%.
Storage – Stack the insulated plasterboards on a flat surface, within a cool and dry environment. If left outside, cover the boards with weatherproofing materials. Do not apply pressure to the boards. This includes walking on the boards to avoid damage. If applying excess weight to the boards, as a result, they can crumble internally and the thermal quality of the board will be affected.

Key Features of Kingspan K118 Insulated Plasterboard

• Lightweight and easy to cut, handle, and install
• Great thermal qualities
• Temperature-controlled internal climate
• Saves money on monthly bills
• Long lasting lifespan
• Durable and reliable
• Water vapour resistant
• Free from harmful gases (CFC and HCFC)
• They do not add to the formation of any gases with Ozone Depletion Potential (ODP) or Global Warming Potential (GWP)

Kingspan 72.5mm K118 insulated plasterboard is 2400mm x 1200mm with a thermal conductivity of 0.019W/mK.

Kingspan K118 72.5mm Application

K118 72.5mm boards are a rectangular shape. These boards are designed for easy installation. Installed the boards within the buildings thermal envelope including walls, roofs, and ceilings.
The 72.5mm is all-round performer and manufactured for a range of general building projects and specialist applications. The multi-purpose boards are designed for commercial, residential, and industrial buildings. K118 72.5mm can also be fitted alongside other insulation materials. In addition, K118 can help to meet building regulations. See all application methods listed below:

• Walls – Solid Brick walls
• Walls – Metal and timber frames
• Ceiling – between rafters
• Walls – Solid Stock Walls
• Roofs – over pitched roof rafters

The boards are extremely durable and last lasting. The 72.5mm insulated plasterboard will last for as long as the building does, and product performance will not reduce over time. The K118 72.5mm is a well-used product within the construction industry. Unlike insulation boards and plasterboard, 72.5mm insulated plasterboards are a 2-in1 combo that will save time and money. The thinner nature of the 72.5mm means this board is great for overlapping other insulation materials to provide that bit of extra thermal protection.

How To Install Kingspan K118

Cut Kingspan K118 insulated plasterboards using a fine-toothed saw or a sharp knife. Use the Sharpe knife by scoring and snapping the boards and scoring the other side.
Always consult a building / construction professional before insulation your property. This can be a costly and time effective mistake. Ensure the walls are free from condensation and mould before insulating. Please note this is a guide only.

Firstly, install timber battens (backed with a strip of damp proof course) onto solid walls. Fix the battens around the wall’s perimeter including openings such as doors and windows no more than 75mm from its end. Then install the battens horizontally at 600mm centres around the room.
Secondly, fix the boards onto the timber, lightly butting two sheets at the centre of the battens, and fitting fixings 10mm from the boards edge. Apply either drywall screws (which can be used at 300mm centres) or large headed galvanised clout nails (at 150mm centres).
Thirdly, When all the boards are fixed to the battens, apply finishings. This includes any tape, beading, filler, adhesive, and decorative materials to complete the walls.

72.5mm K118 Certifications

• Reaction to Fire: Euroclass RtF B-s1, d0 to BS EN 13501-1:2018.
• Standard to BS EN 13950
• Achieves a BRE Green Guide A+ rating
• Quality Management Standard – ISO 9001:2015
• Environmental Management Systems – ISO 14001: 2015
• Occupational Health and Safety Management – ISO 45001: 2018