Kingspan K107 60mm Pitched Roof Insulation Board (2400 x 1200mm) – 14.4m2 pack

Kingspan K107 60mm Pitched Roof Board

K107 60mm – a high-quality premium performance, lower-lambda rigid thermoset phenolic insulation board. The Phenolic core has low emissivity foil facings bonded to each side. The boards are light and as a result, easy to cut and handle and install. 60mm K107 is reliable and durable because of its great lifespan that does not degrade with time.

60mm K107 Kingspan Pitched Roof Insulation – a popular choice of thickness because this product can be installed between the rafters in the roof. More so, this board can be paired with other insulation materials to achieve a thicker size as well as thermal quality. This will also help to achieve building regulations. The thicker the board the better the thermal resistance – consequently, heat levels remain inside the property.

60mm K107 key features:

• 2400mm x 1200mm
• Thermal conductivity 0.019W/mK
• Water repellent – therefore will not absorb water
• No maintenance required
• Kooltherm 100 Range
• Rectangular Shape
• Free from harmful gases including CFC and HCFC
• Zero Ozone Depletion Potential (ODP) as well as Low Global Warming Potential (GWP)

60mm Kingspan K107 Application

K107 60mm can be installed in residential and commercial buildings including new builds and refurbs. To conclude, K107 can be installed in most pitched roof applications – see details below.

Unventilated – insulation between & under rafters at 600 mm centres.

• Fully filled insulation between rafters – no sarking board
• Fully filled insulation between rafters – 18 mm sarking board
• Partially filled insulation between rafters – no sarking board
• Partially filled insulation between rafters – 18 mm sarking board

Ventilated – insulation between & under rafters at 400 mm centres (recommended for loft conversion where re-roofing is not intended)

• No sarking boards
• 18 mm sarking board

Unventilated – insulation between & over rafters at 600 mm centres (recommended for new build or re-roofing)

• No sarking boards
• 18 mm sarking board

Ventilated and unventilated – dwarf wall and loft floor/ceiling level insulation

• Dwarf wall – insulation between studs and inside studs
• Loft floor or flat ceiling – insulation between and over joists
• Loft floor or collar tie – insulation between and under joists

Cut K107 60mm with a sharp knife and in short, install by pushing the pre-cut boards in between the rafters. Consult a professional before insulating your property.

Kingspan 60mm K107 Specifications

Kingspan K107, can help you make your home more energy efficient. The K107-pitched roof boards prevent heat from escaping through the roof. As a result, will help tackle climate change and global warming. By preventing heating from leaving the roof/loft space you are also saving yourself money on up to 35% of monthly energy bills. Heat rises from bottom to top however the insulation installed into a pitched roof reflects the heat back down, heating the building from top to bottom.

Certifications:

• BS EN 13166
• Euroclass RtF F to BS EN 13501-1:2018
• BBA Certificate No 16/5299
• 0% (minimum) to BS EN ISO 14021
• Recycled Content 0.75%
• ISO 9001: 2015 (Quality Management Systems. Requirements)
• ISO14001: 2015 (Environmental Management Systems)
• ISO45001: 2018 (Occupational Health and Safety Management Systems)
• ISO50001: 2018 (Energy Management Systems.)