12.5mm Siniat Moisture Board
Siniat Moisture 12.5mm GTEC Board is a type of gypsum board that is specifically designed to resist moisture and prevent the growth of mould and mildew. It is made with a moisture-resistant gypsum core that is covered with a special moisture-resistant paper liner on both sides, making it an ideal choice for use in high humidity areas such as bathrooms, kitchens, and utility rooms.
In terms of environmental sustainability, Siniat Moisture GTEC Board is made with natural gypsum and does not contain any harmful substances such as asbestos. It is also 100% recyclable, making it an environmentally friendly choice for builders and contractors.
The benefits of using Siniat Moisture GTEC Board – 12.5mm
One of the key benefits of Siniat Moisture 12.5mm GTEC Board is its ability to resist moisture. This is achieved through the use of a moisture-resistant gypsum core, which is specially formulated to withstand exposure to moisture without becoming damaged or degraded. In addition, the paper liner on both sides of the board is also moisture-resistant, helping to further protect the board from the effects of moisture and humidity.
Another benefit of Siniat Moisture GTEC Board is its ability to prevent the growth of mould and mildew. This is important in areas where moisture is present, as mould and mildew can quickly grow and spread, causing damage to the building and potentially leading to health issues for occupants. Siniat Moisture GTEC Board has been tested in accordance with ASTM D3273, and has been found to have no mould growth after 28 days of exposure to high humidity conditions.
Siniat Moisture GTEC Board (12.5mm) is also easy to install, making it a popular choice among builders and contractors. It can be cut to size with a saw or a knife, and can be secured to walls and ceilings using screws or adhesive. The board is lightweight, making it easy to handle and manoeuvre during installation.
How to install Siniat Moisture GTEC Board
Installing Siniat Moisture GTEC Board (12.5mm) is a straightforward process that can be accomplished by following these general steps:
- Gather necessary tools and materials:
- Measure and cut the board:
- Apply adhesive or secure with screws:
- Install the board:
- Finish the edges:
- Allow time for drying:
Before you begin, make sure you have all the necessary tools and materials for the job. This includes the Siniat Moisture GTEC Board, screws or adhesive, a saw or knife for cutting the board to size, and any necessary safety equipment such as goggles and gloves.
Measure the area where you will be installing the Siniat Moisture GTEC Board and cut the board to size using a saw or knife. Make sure to leave a small gap around the edges to allow for expansion.
Depending on the application, you can either apply adhesive to the back of the board or secure it to the wall or ceiling using screws. Follow the manufacturer’s instructions for the specific type of adhesive or screws you are using.
Once the adhesive or screws are in place, carefully position the Siniat Moisture GTEC Board onto the wall or ceiling. Use a level to ensure that it is straight and flush with the surrounding surfaces.
Once the board is in place, finish the edges by applying joint tape and joint compound. This will help to create a smooth and seamless finish.
Depending on the type of adhesive or joint compound you are using, you may need to allow time for drying before finishing the surface with paint or wallpaper.
It is important to follow all safety guidelines and manufacturer instructions when installing Siniat Moisture GTEC Board to ensure a safe and effective installation. If you are unsure about any aspect of the installation process, consult with a professional or contact the manufacturer for assistance.
How to correctly store Siniat Moisture GTEC Board
Proper storage of Siniat Moisture GTEC Board is important to maintain the quality and performance of the board. Here are some tips on how to correctly store Siniat Moisture GTEC Board:
Sunlight can cause the board to fade or discolour, so it is important to keep it away from direct sunlight. If the board is exposed to sunlight for extended periods of time, it can also affect the board’s strength and durability.
When stacking the boards, make sure to place them flat on top of each other. Avoid stacking them on their sides, as this can cause them to warp or bend. It is also important to avoid stacking the boards too high, as this can cause the bottom boards to become crushed or damaged.
The edges of the board are particularly vulnerable to damage, so it is important to protect them during storage. Use edge protectors or cover the edges with cardboard or other protective material to prevent any damage.
By following these guidelines, you can help to ensure that your Siniat Moisture GTEC Board remains in good condition and is ready for use when you need it.
What is Siniat Moisture GTEC Board?
Siniat Moisture GTEC Board is a type of gypsum board that is specifically designed to resist moisture and humidity.
Where can Siniat Moisture GTEC Board be used?
Siniat Moisture GTEC Board can be used in areas with high levels of moisture or humidity, such as bathrooms, kitchens, and utility rooms. It can also be used in commercial or industrial settings where moisture resistance is required.
What are the benefits of using Siniat Moisture GTEC Board?
The benefits of using Siniat Moisture GTEC Board include resistance to moisture and humidity, improved indoor air quality, and increased durability and longevity of the wall or ceiling.
Can Siniat Moisture GTEC Board be painted or wallpapered?
Yes, Siniat Moisture GTEC Board can be painted or wallpapered once it has been installed and finished.
Can Siniat Moisture GTEC Board be recycled?
Yes, Siniat Moisture GTEC Board can be recycled and is made from sustainable and environmentally friendly materials.
Dimensions | 2400 × 1200 mm |
---|---|
Brand | Siniat |
Thickness | 12.5mm |
Material Type | Gypsum |
Pieces Per Pack | 1 |
Sales Unit | Board |
Unit Coverage | 2.88m2 |
Manufacturers Reference | 90540 |
Thermal Conductivity | 0.25w/mk |
Fire Rating | A2-s1, d0 |
Edge Type | Tapered |
Facing | Green Paper Facing |
Weight (kg/m2) | 9.4kg/m2 |
Product Range | Siniat GTEC Moisture Plasterboard |
Tiana –
High-quality material that performs well
Aaron –
Flawless finish every time with Siniat plasterboards.
Alexander –
Briliant for the kitchen or bathroom
Kit F –
We wasn’t sure if this was the right board because the image looked like a square but can confirm these are proper GTEC moisture boards. Can’t moan at all with the service.